- CF Slot: CF I/CF I Pro/CF I Pro II/CF I Elite Pro/CF I Elite Pro/CF I ultra II/Shoot & Store CF/CF II/CF II Magicstor/CF II Ultimate/CF-Digital Film/CF 3.0/CF 4.0/EXTREME III CF/EXTREME CF/ULTRA II CF/HS CF/XS-XS CF/CF ELITE PRO/CF PRO/CF PRO II/IBM MD/ HITACHI MD/MAGIC STOR MD
- SD/MMC Slot: SD/EXTREME SD/EXTREME III SD/ULTRA SD/ULTRA II SD/ULTRA II SD PLUS/ULTRA-X SD/ULTRA SPEED SD/SD PRO/SDHC/SD ELITE PRO/HS SD/MMC/MMC 4.0/MMC 4.2/HS MMC/HS RS MMC/RS MMC/RS MMC 4.0/MMC Mobile/MMC Plus/MMC Micro/DV-MMC/mini SD/HS mini SD
- MS Slot: MS/MS PRO/MS DUO/MS PRO DUO/MS MG PRO/MS PRO MG HIGH SPEED/MS PRO MG EXTREME III/MS MG/MS MG DUO/MS MG PRO DUO/EXTREME MS PRO/MS SELECT/EXTREME III MS PRO/ULTRA II MS PRO/HS MS MG PRO/HS MS MG PRO DUO/HS MS PRO/HS MS PRO DUO/MS ROM/MS PRO Magic Gate/MS DUO Magic Gate
- M2/MICRO SD Slot: MICRO SD (T-Flash), MS MICRO (M2)
- Extreme Digital Slot: Extreme Digital Media Cards/Extreme Digital M type/Extreme Digital H type
This review is from: Rosewill RCR-IC002 74-in-1 USB 2.0 3.5" Internal Card Reader (Electronics)
plugged into one of the usb ports on the motherboard and immediately was recognized. It will not show in My Computer until there is actually a card inserted into the reader itself. Did have a little trouble fitting it into my case(Cooler Master Elite 310) had to offset it in the bay just so it was flush with the case faceplate. Works on Windows 7 Ultimate 64 bit. Great cheap product.
Help other customers find the most helpful reviews
This review is from: Rosewill RCR-IC002 74-in-1 USB 2.0 3.5" Internal Card Reader (Electronics)
This device came up with no drivers for me to install. I use this with my sd and memory stick pro memory sticks. It is a pain to get an sd card inserted. You will need a flash light and be sitting at eye level with the slot and several tries later you might be able to get it in. The face plate needed to be removed for sd insertion.
Help other customers find the most helpful reviews
This review is from: Rosewill RCR-IC002 74-in-1 USB 2.0 3.5" Internal Card Reader (Electronics)
On first look this appeared to be exactly what I was looking for in a multi card reader. Once I installed it I realized it had some flaws. First and foremost, why build a device like this that makes you insert the cards upside down into the slots? For me that's OK, but I will need to remind my wife and kids every time they use it or risk damage to cards and the unit. Also, the first time I tried to insert a Micro SD card it slipped completely through the opening and into the unit. I had to disassemble the computer again to retrieve the card and found that only one of two screws were factory installed to hold the internal circuit board to the frame. Fixed this and still the alignment of the board to the front panel cutouts is not good. All in all more trouble than the low price is worth.
Help other customers find the most helpful reviews
